Proceedings of the International Conference on Research and Innovations in Mechanical Engineering ICRIME-2013 / edited by Sehijpal Singh Khangura, Paramjit Singh, Harwinder Singh, Gurinder Singh Brar.

This book comprises the proceedings of International Conference on Research and Innovations in Mechanical Engineering (ICRIME 2013) organized by Guru Nanak Dev Engineering College, Ludhiana with support from AICTE, TEQIP, DST and PTU, Jalandhar. This international conference served as a premier foru...

Full description

Saved in:

Bibliographic Details
Corporate Author:	SpringerLink (Online service)
Other Authors:	Khangura, Sehijpal Singh (Editor), Singh, Paramjit (Editor), Singh, Harwinder (Editor), Brar, Gurinder Singh (Editor)
Format:	eBook
Language:	English
Published:	New Delhi : Springer India : Imprint: Springer, 2014.
Edition:	1st ed. 2014.
Series:	Lecture Notes in Mechanical Engineering, Springer eBook Collection.
Subjects:	Mechanical engineering. Control engineering. Robotics. Mechatronics. Industrial engineering. Production engineering. Electronic resources (E-books)
Online Access:	Click to view e-book
Holy Cross Note:	Loaded electronically. Electronic access restricted to members of the Holy Cross Community.

Table of Contents:

Comparative Study of Laminated Composite Beam using Narrow and Wide Beam Criterion
Design and Analysis of Submarine Radome
Development of Lance Clamping Device for Basic Oxygen Furnace
Development and Performance Evaluation of Water Resistant Corrugated Board for Packaging
Mathematical Modelling Approach for Optimization of a Rotary Hook Feeder
Tool Path Generation for Free Form Surfaces using B-Spline Surface
Response Surface based Modeling of Mechanical System
Vibrations Analysis of Rotor Bearing Housings Considering Unbalancing in Two Planes
Experimental Testing and Evaluation of a Prototype Magneto-Rheological Damper
Drilling of Glass Fibre Reinforced Epoxy Laminates with Natural Fillers: Thrust Force Analysis
Assessment of Strength Evaluation and Structure Stability of Building Destroyed in Fire by using Techniques of Non Destructive Testing
Corrosion Monitoring and Service Life Prediction of Rebars in Structural Concrete: State-of-Review
Comparing Taguchi Method and RSM for Optimizing Flank Wear and Surface Roughness during Hard Turning of AISI D3 Steel
Fine Finishing of Metal Matrix Composite Plate with Magnetic Abrasives
Optimization of Dry Ball Burnishing Process Using Neuro Fuzzy Interface System and Genetic Algorithm
A Review on Advances in Wire Electrical Discharge Machining (WEDM)
Effect of Filler Wire Composition on Joining Properties of GTAW Stainless Steel 202
Effects of Machining Parameters on Performance of Electrical Discharge Surface Grinding of AISI D2 Die Steel with Composite Tool Electrode
Optimisation of Single Point Machining Parameters for Minimum Energy Utilisation
Development of Bio-Medical Implant (Hip Joint) by Combining Fused Deposition Modelling and Investment Casting
Multi Response Optimization of WEDM using Utility based Taguchi Approach
Finishing of Micro-Channels using Abrasive Flow Machining
An Ultrasonic Micromachining Setup for Machining of 3D Geometries
An Experimental Investigation during Wire Electrical Discharge Machining of Al/SiC-MMC
Optimization of Magnetic Abrasive Finishing Parameters with Response Surface Methodology
Nano Finishing of Steel Rollers (SUS 304) using Diamond based Loosely Bonded Magnetic Abrasives
Finishing of Aluminium Pipes using Silica Sand (River Bed) Based Loosely Bonded Magnetic Abrasives
Compression Test Analysis of Cu Super Hybrid Composite Material
Fabrication and Characterization of Jute Fiber Reinforced-Recycled Polyethylene Composites
Polymer Concrete Composites (PCC) Made from Industrial Waste Materials: A Review
Effect of Molybdenum Addition in Hard Facing Layer on Erosion Resistance Behaviour of Steel
Tribological Properties of Different Micro Abrasives in Friction Materials
Investigation on Process Parameter Optimization for Coating Density and Micro Hardness of Cold Sprayed Coatings
Effect of Heat Treatment on Wear Behaviour of Hard Faced Steel
Experimental and Characterisation of Aluminium over Mild Steel by Friction Surface Processing
Analysis of Roughness in Turning of EN-8D Alloy Steel using Cryogenically Treated HSS Tool
Rice Husk Reinforced Composites: A Review
Effect of Glass Fiber and Filler Volume Fraction Variation on Mechanical Properties of GFRP Composite
Slurry Erosion Testing of Detonation Gun Sprayed Cr3C2-25NiCr and Cr2O3 Coatings on CF8M Steel
Sliding Wear Performance of Plasma Spray Ni-20Cr Coating on AISI 309 SS Steel
Effect of Natural Fillers on Wear Behaviour of Glass Fiber Reinforced Epoxy Composites
SiCp Reinforced Al-6063 MMCs: Mechanical Behaviour and Micro-structural Analysis
Effects of Humidification on Proton and Electron Conductivity of an Activated Carbon-Nafion Composite Electrode
Combating Wear by Surface Modification Techniques
Reduction in Fuel Consumption and CO2 Emissions by Elimination of Steam Leak from Steam Traps
Comparative Study of Thermal Performance of Liquid Metal and Water Flow through a Channel
Comparison of Different Agro Residue Biomass for Power Generation in Paper Industry
Thermal Management of Low Volume Complex Electronic Systems
Productivity Improvement through 5S Implementation in Indian Manufacturing Industries
A Multiple Linear Regression Approach in Modelling Traffic Noise
Factor Analysis of Sourcing Flexibility among Supply Chain Partners in Indian Industries
Performance Enhancement of Manufacturing Unit using Six Sigma DMAIC Approach - A Case Study
Thermal Energy Saving using Total Quality Management
An Artificial Neural Network Model for Traffic Noise Predictions
Growth through Engineering Six Sigma
Minimizing the Makespan and Tardiness of Identical Parallel Machines by Genetic Algorithm
Implementation of Quality Control Tools in an Automobile Organization to Reduce the Rejection of Casting Components
Traffic Noise Modelling using Artificial Neural Network - A Case Study
A Study on Effect of Operating Parameters on Tire/Road Interaction Noise
Evaluating the Contributions of Just-in-Time Manufacturing on Manufacturing Performance in Indian Manufacturing Industry
Quantitative Assessment of Hospital Waste Generation to Recover Energy - A Case Study
Optimization of Fractal Tree Dipole Antenna at 2.4GHz using SuperNec
A Comprehensive Performance Analysis of MANET Protocols.

Proceedings of the International Conference on Research and Innovations in Mechanical Engineering ICRIME-2013 / edited by Sehijpal Singh Khangura, Paramjit Singh, Harwinder Singh, Gurinder Singh Brar.

Similar Items