Binders and materials XI : selected, peer reviewed papers from the 11th International Conference on Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic

Binders and materials XI : selected, peer reviewed papers from the 11th International Conference on Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic / edited by Karel Dvořák [and three others].

Collection of selected, peer reviewed papers from the 11 th International Conference Binders and Materials 2013 (ICBM 2013), December 5, 2013, Brno, Czech Republic. The 72 papers are grouped as follows: Chapter 1: Cement and Binders Based on Cement, Chapter 2: Inorganic Binders, Chapter 3: Organic B...

Full description

Saved in:
Bibliographic Details
Corporate Author: International Conference on Binders and Materials Brno, Czech Republic
Other Authors: Dvořák, Karel (Editor)
Format: eBook
Language:English
Published: Zurich, Switzerland : Trans Tech Publications, [2014]
Series:Advanced materials research ; v. 897.
Subjects:
Building materials > Congresses.
Binders (Materials) > Congresses.
Civil engineering > Materials > Congresses.
TECHNOLOGY & ENGINEERING > Civil > General.
Binders (Materials)
Building materials
Civil engineering > Materials
Conference papers and proceedings
Online Access:Click for online access
Table of Contents:
  • Binders and Materials XI; About ICBM and Committees; Table of Contents; Chapter 1: Cement and Binders Based on Cement; Influence of Preparation Parameters on Properties of Belite Clinker; Study of Increasing of Belite Reactivity; Proposal and Testing Masonry Cement; Testing Self-Levelling Floor Screeds on the Basis of Ternary Binder; Thermoanalytical Study of Binders Containing Pozzolanic and Latent Hydraulic Materials; Reduction of CO2 Emissions at Firing of Binders Type Portland Cement; Sodium Hexametaphosphate as Deflocculation Agent for Calcium Aluminate Cements in Porcelain Body.
  • Thermal Insulating Alkali-Activated Materials with Lightweight AggregateAnalysis of Possibility of Using Geopolymers in Rehabilitation of Reinforced Concrete Structures; Modification of the Raw Mix for Firing of Dicalcium Silicate Using Potassium Sulphate; Chapter 3: Organic Binders; Repair of Composite Structure Using Cold Sleeve with Polymer Filling Material; Properties of Polyurethane and Epoxy Modified Cementitious Hybrids for Flooring Systems; The Behavior of the Advanced Materials for Blast Energy Absorption under Low and High Velocity Load.
  • The Influence of Silane Coupling Agent on Glued Spruce Wood Using Epoxy AdhesiveBitumen Substance Analysis; Chapter 4: Silicate Materials; Determination of Sintering Activity of Sodium-Potassium Feldspar; Development of Advanced Masonry Structures with Utilization of Alternative Thermal Insulating Materials; Physical-Mechanical Aspects of Preparing Thermal Insulation Materials on the Basis of Liquid (Water) Glass; Possibilities of Reducing the Apparent Porosity of Silica Bricks for the Coke Batteries; Pozzolanic Aktivity Increase of Recycled Glass; Chapter 5: Building Materials.
  • Comparison of Impedance Spectra of Concrete Recorded with Utilizing Carbon Transition PasteReactivity of Brick Powder in Lime Mortars; To the Problems of Determination of Dynamic Elasticity Modules of Calcium Silicate Bricks by Means of Resonance Method; Corrosion Inhibitors as a Prevention; The Effect of Concrete Quality on the Acoustic Emission Parameters during Three-Point Bending Fracture Test; Possibilities of Hydrophobization of Thermo-Insulating Materials Based on Natural Resources; Influence of Contact Parameters on Load-Carrying Capacity of Hybrid Composite Cross-Section.

Similar Items